To get your Fydelia splash page working with your PlasmaCloud network, just email support@fydelia.com and provide these details: We’ll do the rest!
To get your Fydelia splash page working with your PlasmaCloud network, just email support@fydelia.com and provide these details: We’ll do the rest!
OVERVIEW Setup is extremely simple with IgniteNet ecCloud. There are a couple of things to note: 1) Provision to the APs can take several minutes with ecCloud. You may not immediately see your changes 2) This document was created using the Spark Wave 2 AC1200, with firmware version 2.9.8-4594. When testing with a lower firmware version 2.1.1-3354, testing was not successful, so we strongly recommend keeping up to date with firmware versions. CREATING THE SSID […]
Prerequisites CREATE AN SSID Under “WiFi & Switch Controller” click SSIDs Click Create New -> SSID SSID and DHCP Enter a name for your SSID (you will enter the actual broadcast network name further down) Also enter your desired IP range for guest devices and enable DHCP: WIRELESS NETWORK SETTINGS Pay attention to these steps, as the captive redirect will not work without them 1) SSID Name Under WiFi Settings enter an SSD Name, such […]
When you are setting up your EZMaster controller, you will need to provide a splash page URL where guests are redirected to. Follow these steps to create your first splash page: 1. Log in or register Visit: https://ondemand.fydelia.com You can either log in or register. If you are a reseller, CONTACT US at www.fydelia.com to have an account set up for you. 2. Under the Splash page menu, Click CREATE 3. Enter a name for your splash page This will be […]
There are 3 general steps involved with DrayTek setup: STEP 1 – RADIUS setup SETUP 2 – HOTSPOT setup IMPORTANT: Remember to tick “Enable this profile” when you are ready to test This ensures that the guest is allowed to visit the Fydelia splash page (walled garden) Notice that the fixed URL is used. This is the best way to redirect guests to your preferred destination, such as your Instagram, or a custom promotional page […]
OpenMesh is a very easy platform to implement. The key steps are: Setting the splash URL and secret Choose your SSID Enter your SSID Name and choose the “Open” authentication type Choose the “Captive Portal” tab For Type, select “Hosted Remotely” and enter the full splash page URL. The secret is “Fydelia”: The Authentication settings will be provided to you by Fydelia Support during onboarding. Authentication settings Enter the Auth URL provided to you by […]